The Aussie Digger

"If I had to take hell, I would use the Australians to take it and the New Zealanders to hold it." -Erwin Rommel.

 

Well thankfully we're not going to have to take hell (I haven't yet found a DOOM-esque demon in 6mm) or hold it because I haven't got any Kiwi minis just yet... emphasis on "yet" ;)

However, if we have to take hell, we're halfway there - why?  Because I have some Aussie troops painted up and ready to get stuck in!

Here's my latest build for infantry - these guys were actually completed before the USMC troops, however that is only because I started these after putting the USMC on hiatus with the personal stuff that had to be resolved first.

I found the camo on these to be quite a challenge - AUSCAM is a very difficult camo to paint at this scale and like the Aussie armour you can make it either dark as a 'fresh' uniform, or use lighter colours to show a more 'used' set of cams.  The two examples here give an idea of just how much difference you can have between any sets!  I should also know as I have my own gear as part of my issue.

We also have some more 'American' style cams for our more specialised troops - such as in the image with the USMC guys, where I assume that 'Old Mate' in the middle of the image is probably an operator of some type.

In the end, I decided to 'honour' the look after a few test models using "German Camo Beige" as the basis... instead, I went with "Khaki" from Vallejo as my base paint - to give the idea of the multiple green blots (often called "Bunnies and Hearts" because of the way the camo dots are shaped) and did some light dotting of Mahogany Brown and Black-Grey in a few select areas of the miniatures.

Some of the minis also have 'Russian Uniform' green helmets - our helmets themselves are a dark green similar in tone, so I did a few troops with that for mixture.

The second group shown below includes the very first test mini I did... he's the poor sod who looks like he fell over in mud - that... well, story behind that.  You see, when I was testing the cam design, I accidentally smeared a whole brush of Mahogany Brown over him when I finished... once I had got over my initial 'have a small hissy fit about crapping on the work I just did', I looked at the brighter side and decided to have it tell said story.

They are meant to be fighting in a muddy area, so it would not surprise me if one or two of them had a tumble!

So, I let my inner Bob Ross out, and came out with a reasonable recovery ;)

Thank you Bob Ross - you are one of my many Spirit animals.
Others include Chuck Norris, Honey Badgers as an entire species; and the entire "Death-continent" that is Australia.

This is what they look like at 'Gaming Height'

The models I used come from the following two packs produced by GHQ:
GHQ French modern infantry - http://www.ghqmodels.com/store/n562.html
and
GHQ US Modern Infantry 2001-2014 - http://www.ghqmodels.com/store/n570.html

I have only one real gripe with both of these packs - so GHQ, if you're listening... "Why do you have to add so many machine guns and sniper rifles to your basic riflemen packs?"

Seriously, my French have more sharpshooters than there probably are in a whole French Divison and my US soldiers are using LMGs and Laser Designators as their standard issue weapons haha!  (Seriously though, an extra rifleman pose in each would be a blessing even if it meant a reduction in number of Laser Designators/ Snipers) 

Anyway, I did the best with what I had, and managed to get about six sets of troops, plus spares for weapons teams, so I'm not complaining too much - although an extra pose of rifleman or two would be a nice addition.

Finally, some people have been asking what I use to make my models - as my painting has been deemed "Not bad out of ten" by the community.

So folks, I present to you what I use! Oddly enough, while I think GW's models are okay - but wildly overpriced for what you get... there CITADEL gear, back in the day, was worth every overpriced cent!

The Citadel pliers are beasts, and I have never had any issue with them.  The Citadel brushes are also, hands down, my absolute favourite for painting as they are just so flexible with what I can do with them (and I treat them pretty roughly, so they can take a beating!)

The Army Painter masterclass fine tip brush you see is a replacement for my GW one, as when it died it's replacement was a stupidly high priced amount... I kind of need my other kidney still, so I couldn't afford to pawn it off, but the Army Painter brush is working brilliantly as well.

I also use Jeweller's files of different head types, and good old toothpicks for mixing paints/ testing colours.

Finally, I do not use anything fancy to hold my models, just my good old fingers... which have seen more than their fair share of superglue, paint and assorted scrap metal pieces.  I find the ability to be so close to the brush helps me to judge just how hard I am pressing a brush into the model, allowing me to better judge what kind of force I need.

Hope you find it useful!

Desert DevilDogs!

 Well another day down and I seem to be on a bit of a roll with the minis!  A few days ago I showed some nearly complete US Marine Corps soldiers on the 6mm Facebook page (link in the right tab) and am pretty happy with the final product, but not so happy with the photos - so I went and redid them after I realised I could get a lot more from my "lightbox" AKA 'My desk lamp bent down almost directly onto the model' by putting the model on an angle so the light hits it directly.

Because, you know, science 101 - light travels in a straight line etc and twit here didn't quite remember that for the last few shots.

Situation resolved! ;)

Anyhow, you may be wondering why the pictures of muddy, cruddy fields?  Well that is because that is the look I am aiming for with the bases on my miniatures... I want them to look like they are in a place that is going through some regular storms.  These kind of storms make a real, real fine (and really... REALLY gluey) mud that sticks to ANYTHING thanks to the fine red silt of the soil.



So my forces, in their imagi-nation not Africa/ not Australia (still NOT sure which exactly it will be!) are fighting in the onset of the "wet season" wherever they will be... it will be wet, it will be muddy... they ain't gonna feel pretty at all!  (Although I hope the painting will be!)

Painting wise, I have completed four stands of DevilDogs to date - two stands of 'Regular' Marines with Green flak jackets, and two stands of the "Marine Raider Regiment" - the reborn MARSOC - to differentiate them, they are using a 'tactical' combat vest... so in reality it just means they have a 'Luftwaffe Blue' vest and helmet cover.

One particular mod I am very happy with has been the creation of what I consider to be a "signature" weapon of the US Marine Corps - the SMAW rocket launcher.  Built around the Israeli B-300 system, the SMAW has been used by the Marines since '85 and looks like it will keep being used for quite some time!

To make the SMAW was a reasonably easy task.  As I am using GHQ's "Modern US Infantry" packages, they come with a surprisingly large number of 'Stinger' MANPADS troops - the Stinger is, at this scale, a dead ringer for the SMAW once you cut off the IFF antennae and lightly file the area flush with the missile tube.  A lick of paint, and no one would know you had modified a different system!

I think it is what will set apart my Marines from any other force, the SMAW is such a distinctive system for their use.

The trees on the bases are branches from a larger scale railway model tree snipped apart - doused in super glue, and then dipped in either a mix of clump foliage/grass or a few different dips straight into the flock grass...  The reason I have done this is that I want the trees to look like the spindly 'Chinee Apple' trees we have throughout the top end of Australia like you see down below. 

They're scrubby, shabby looking... and you never, EVER want to land in one... as a bloke who used to live on a property with these terrible, spiky bloody plants, yeah... just don't!

 I also had some very good luck with my wash (nothing crazy, just a Strong Tone 'Army Painter' wash drop bottle where I only use a drop or two in my paintbrush until it runs out) and the toner sat quite nicely within the facial features of the models... showing up real nicely for the images.

My personal favourites are the DevilDog lining up a target with his SMAW over the top of a patch of scrub, and the Marine Raider lying down with the Minimi/ M-249 SAW.

Next up, some completed Diggers to go with the DevilDogs!